Surge protection

VAL-MS-T1/T2 335/12.5/3+0

TTC-6P-2X1-48DC-UT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

VAL-SEC-T2-2+F-220DC-FM

Pluggable surge protective device free of leakage current for 2-pos. isolated and grounded DC voltage systems with linear operating characteristic up to 220 V DC, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, status message on each plug.

TTC-6-MOV-C-24DC-PT-I

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

TTC-6P-2X1-24DC-UT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

FLT-SEC-T1+T2-2C-350/25-FM

Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 2-phase power supply networks, with combined PE and N installed in one conductor (L1, L2, PEN).

VAL-MS-1-100-320-A

Surge protective device consisting of base element with remote indication contact and protective plug, for mounting on NS 35, nominal voltage: 240 V AC, 1+0 circuit.

VAL-US-277/40/1+1-FM

Surge protective device, two channel with remote indicator contact for 277 V AC, 2-wire plus ground.

VAL-MS-T1/T2 48/12.5 ST

L-N replacement plug for VAL-MS-T1/T2 48/12.5 plug-in lighting/surge arrester.

TTC-6P-1X2-M-EX-24DC-UT-I

Surge protection, consisting of a protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating Ex-i signal circuit, e.g., 0(4) ... 20 mA current loop, HART compatible. Can be used in safety-related circuits up to SIL 3.

TTC-6P-4-24DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 4-wire floating signal circuit with high nominal current. Ideal for 4-conductor measurements, e.g., of temperatures and weights. Can be used in safety-related circuits up to SIL 3.

FBS 2-18

Plug-in bridge for cross-connections in the VAL-MS BE-AR terminal center, 2-pos., color: Red

TTC-6-FC-UT

Fuse carrier for surge protective devices of the TERMITRAB complete product range with screw connection technology. Multi-level connection on TTC-6 housings possible. For conventional 5x20 mm miniature fuses.

PT 4-BE

Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit, bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

PT 4X1-BE

Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

VAL-SEC-T2-3C-350-FM

Plug-in surge arrester, in accordance with Type 2/Class II, for 3-phase power supply networks with combined PE and N installed in one conductor (4-conductor system: L1, L2, L3, PEN), with remote indication contact.

MPB 18/1- 8

TTC-6-2X1-M-24DC-UT-I

Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., Digital IN/OUT.