Surge protection

CM 2-PA-SEC-HYBRID

CHECKMASTER 2 test adapter for the FLT-SEC-H product range.

D-LAN-19"-D-P

Replacement PCB for ""D-LAN-19""..."" products. Assembly with four surge-protected ports for data interfaces in acc. with Cat.5/EN 50 17 3 (100Base-T) incl. RJ45 connection sockets.

PT 2X1VA- 60AC-ST

Protective plug PT with protective circuit for higher signal voltages, 2-channel, visual error display. Nominal voltage: 60 V AC

PT-IQ-EX-L-PP

Partition plate for NS-35/7,5 DIN rails to ensure a clearance of 50 mm between the controller and surge protection for PT-IQ-EX systems.

VAL-MS 385/80/1+1-FM

Type 2 surge protective device for 3-conductor power supply systems (L1, N, PE), with plug latching and remote indication contact.

PT-IQ-1X2-24DC-P

VAL-MS 600DC-PV/2+V-FM

PLT-SEC-T3-60-P-UT/PT

Replacement plug for type 3 surge protection from the PLT-SEC-…-UT/PT product series. Nominal voltage 60 V.

PT-IQ-1X2-48DC-PT

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for a 2-wire floating signal circuit. Can be used in safety-related circuits up to SIL 3.

TTC-3-2X1-24DC-PT

Surge protection for two signal wires with common reference potential, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

TTC-6-MOV-C-120AC-UT-I

Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

LIT 1X2-24

Surge protection in a one-piece 6.2 mm wide DIN rail module for one floating signal circuit in 2-conductor technology. Tested in accordance with the following types of protection in Ex areas: Ex ia IIC / Ex iaD. HART-compatible.

PT-IQ-2X1-24DC-PT

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential.

VAL-SEC-T2-1S-350VF-FM

Pluggable surge protective device free of leakage current, in accordance with Type 2/Class II, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.

TTC-6P-3-5DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 3-wire floating signal circuit with high nominal current.

FLT-SEC-H-T1-264/25-P

Replacement plug for lightning current arresters from the FLASHTRAB SEC HYBRID 264 product range, for L-N and L-PEN paths.

BLT-T2-320-UT

Type 2 surge arrester for universal mounting in lights and cable connection boxes. Specifically for insulation class II with optical fault indication. Installation in branch or through wiring. Version: 230 V AC

VAL-MS-T1/T2 335/12.5/4+0