Surge protection

TTC-6P-1X2-M-EX-24DC-UT-I

Surge protection, consisting of a protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating Ex-i signal circuit, e.g., 0(4) ... 20 mA current loop, HART compatible. Can be used in safety-related circuits up to SIL 3.

TTC-6P-4-24DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 4-wire floating signal circuit with high nominal current. Ideal for 4-conductor measurements, e.g., of temperatures and weights. Can be used in safety-related circuits up to SIL 3.

TTC-6-FC-UT

Fuse carrier for surge protective devices of the TERMITRAB complete product range with screw connection technology. Multi-level connection on TTC-6 housings possible. For conventional 5x20 mm miniature fuses.

PT 4-BE

Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit, bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

PT 4X1-BE

Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm

VAL-SEC-T2-3C-350-FM

Plug-in surge arrester, in accordance with Type 2/Class II, for 3-phase power supply networks with combined PE and N installed in one conductor (4-conductor system: L1, L2, L3, PEN), with remote indication contact.

MPB 18/1- 8

TTC-6-2X1-M-24DC-UT-I

Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., Digital IN/OUT.

TTC-6P-T3-24DC-UT-I

Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator for 24 V DC power supplies

PT 5-HF-12 DC-ST

Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 12 V DC

VAL-US-120/40/1+0-FM

Surge protective device, single channel with remote indicator contact for 120 V AC

FLT-SEC-P-T1-350/25-P

Replacement plug for lightning current arresters from the FLASHTRAB SEC PLUS 350 product range, for L-N and L-PEN paths.

VAL-CP-MOSO 60-3S-FM

Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a status indicator and remote indication contact. Design: 5-conductor system (L1, L2, L3, N, PE), mounting on 60 mm system technology (power rail system)

TTC-6-GDT-C-24AC-UT-I

Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential.

TTC-6-2X1-F-M-24DC-PT-I

Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential. Indirect grounding via gas discharge tube, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

TTC-6P-1X2-F-48DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.

FLT-SEC-P-T1-1C-264/50-FM

Plug-in lightning current arrester, in accordance with Type 1/Class I, for 1-phase power supply networks with combined PE and N installed in one conductor (L1, PEN).

FLT-SEC-T1-350/25-P

Replacement plug for lightning and surge arresters from the FLASHTRAB SEC product range, for L-N and L-PEN paths.