Surge protection

PLT-T3-IT-230-P

Replacement plug for device protection in IT systems from the PLUGTRAB product series. 230 V nominal voltage.

PT-IQ-3-HF+F-12DC-PT

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

VAL-MB-T1/T2 1500DC-PV/2+V-FM

Lightning current arrester/surge protective device for 2-pos. isolated and grounded 1,500 V DC PV systems, for DIN rail mounting, with remote indication contact, temperature-monitored protective elements, status message on the module.

LIT 4-24

Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.

TTC-6P-3-HF-12DC-I-P

Surge protection plug with integrated status indicator on the module for three signal wires. For HF applications. Nominal voltage: 12 V  DC

PT 2+1-S-48DC/FM

Rail-mountable surge arrester as device protection for terminal equipment, fault signal in the plug and signaling contact in the base element, 2-section, pluggable. Design: 48 V DC

VAL-MS-T1/T2 335/12.5/3+1-FM-PT

Universal varistor-based plug-in lightning/surge protective device for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for lightning protection levels III and IV, with remote indication contact. Cables connected via Push-in connection technology.

PT-IQ-2X1-24DC-UT

TTC-6P-1X2-F-24DC-UT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.

TTC-6-1X2-F-M-24DC-UT-I

Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible. Can be used in safety-related circuits up to SIL 3.

VAL-MS 75 VF ST

Surge protection plug type 2 with series connection consisting of varistor and gas-filled spark gap for VAL-MS base element, thermal monitoring, visual fault warning.

TTC-6-MOV-D-24DC-UT-I

Medium surge protection with integrated status indicator for a 2-wire floating signal circuit.

VAL-MS 1000DC-PV-ST

CN-LAMBDA/4-2.25-SB

Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors plug/socket

PT-IQ-17,5-TBUS-5-2.0

DIN rail connector for PT-IQ system for establishing remote signaling and the power supply when a surge protection module is snapped on.

MPB 18/1- 3

Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.

PWT 100-800AC-FM

Lightning/surge arrester, according to type 1/2 / class I/II, for 3-phase power supply networks with combined PE and N installed in one conductor (L1, L2, L3, PEN).

VAL-MS-T1/T2 48/12.5/1+1V-FM

Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact.