Surge protection

TTC-6P-T3-24DC-UT-I

Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator for 24 V DC power supplies

PT 5-HF-12 DC-ST

Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 12 V DC

VAL-US-120/40/1+0-FM

Surge protective device, single channel with remote indicator contact for 120 V AC

VAL-MS 1500DC-PV/2+V

Surge protective device for 2-pos. isolated and grounded 1500 V DC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.

FLT-SEC-P-T1-350/25-P

Replacement plug for lightning current arresters from the FLASHTRAB SEC PLUS 350 product range, for L-N and L-PEN paths.

VAL-CP-MOSO 60-3S-FM

Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a status indicator and remote indication contact. Design: 5-conductor system (L1, L2, L3, N, PE), mounting on 60 mm system technology (power rail system)

TTC-6-GDT-C-24AC-UT-I

Coarse surge protection with integrated status indicator for a signal wire with grounded reference potential.

TTC-6-2X1-F-M-24DC-PT-I

Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential. Indirect grounding via gas discharge tube, e.g., Digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

TTC-6P-1X2-F-48DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for a 2-wire floating signal circuit. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.

FLT-SEC-P-T1-1C-264/50-FM

Plug-in lightning current arrester, in accordance with Type 1/Class I, for 1-phase power supply networks with combined PE and N installed in one conductor (L1, PEN).

FLT-SEC-T1-350/25-P

Replacement plug for lightning and surge arresters from the FLASHTRAB SEC product range, for L-N and L-PEN paths.

PT-IQ-2X2-24DC-UT

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module, for two 2-wire floating signal circuits, HART-compatible.

TTC-6-TVSD-D-24DC-UT-I

Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

FLT-SEC-H MPB-3+1

Wiring bridge for connecting three FLASHTRAB SEC HYBRID lightning arresters with an N/PE spark gap to a 3+1 circuit for TN-S-/TT systems. Connecting pitch of 17.5 mm, 1-phase, 8-pos., 35 mm² cross section with stable plastic housing for the required touch proofness when used as neutral conductor bridge.

PT-IQ-4X1+F-24DC-UT

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

D-LAN-CAT.5-FP

CN-LAMBDA/4-5.9-SB

TTC-3-1X2-24DC-PT

Surge protection for a 2-wire floating signal circuit, e.g., 0(4) mA ... 20 mA current loop, HART-compatible. Can be used in safety-related circuits up to SIL 3.