Supply, Charge 
and Protect

PT 2X2-24DC-ST

PT protective connector with protective circuit for two 2-wire floating signal circuits. 24 V DC nominal voltage. HART-compatible.

VAL-SEC-T2-48DC-P

Replacement plug for surge protective devices from the VALVETRAB SEC product range for DC power sources.

VAL-US-347/30/3+0-FM

Surge protective device, three channel with remote indicator contact for 347/600V and 400/690 V AC, 4-wire.

F-MS 12 ST

Surge protection plug type 2, with N-PE total current spark gap for base element.

TTC-6P-2X1-F-M-24DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.

TTC-6P-2X1-F-48DC-PT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator for two signal wires with common reference potential, e.g., Digital IN/OUT. Indirect grounding via gas discharge tube. Can be used in safety-related circuits up to SIL 3.

FLT-SEC-P-T1-1S-264/50-FM

Plug-in lightning current arrester, in accordance with Type 1/Class I, for 1-phase power supply networks with separate N and PE (L1, PE, N).

VAL-MS 320 ST

Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 320 V AC

FLT-SEC-P-T1-3C-264/50-FM

TTC-6-1X2-M-24DC-PT-I

Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop, Ex e approval for zone 2, HART compatible. Can be used in safety-related circuits up to SIL 3.

VAL-MS BE

Base element for type 2 arresters of the VALVETRAB MS series of products. Design: 1-channel

F-MS-T1/T2 50

Lightning/surge arrester, consisting of base element and protective plug with N-PE total current spark gap, for mounting on NS 35/7,5. Housing width: 17.5 mm (1TE)

TTC-6P-2X1-M-24DC-UT-I

Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., digital IN/OUT. Can be used in safety-related circuits up to SIL 3.

FLT-SEC-P-T1-3S-440/35-FM

VAL-SEC-T2-2S-350-FM

Plug-in surge arrester, in accordance with Type 2/Class II, for 2-phase power supply networks with separate N and PE (4-conductor system: L1, L2, N, PE), with remote indication contact.

BNC-DV 50

BNC connector, double-level, for mounting on NS 32 or NS 35/7.5, wave impedance: 50 Ω

VAL-MS/3+0-BE/FM

Base element for type 2 arresters of the VALVETRAB MS product range, with remote indication contact. Version for 3-phase power supplies with PEN conductor.

TTC-6P-1X2-24DC-I-P

Surge protection plug with integrated status indicator on the module for a 2-wire floating signal circuit. Nominal voltage: 24 V  DC