I/O signal marshalling

TC-D37SUB-ADIO16-MP-P-UNI

Universal Termination Carrier for connecting 16 MINI Analog Pro signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)

TC-C-PTB1-AI-SET1

Cable set for MINI MCR-SL-PTB-FM power module (Item No. 2902958) and MINI MCR-SL-FM-RC-NC error message module (Item No. 2902961), for use on the termination carrier for modules from the MINI Analog series.

FUSE/TE5/3.15A/T-10PCS

Fuse set, number: 10 Pcs., nominal current: 3.15 A, tripping characteristic: slow-blow (T)

TC-EC56F-DO16-ESD-A-TRC

Termination carrier for connecting 16 PSR-FSP modules to digital output cards of the Invensys Triconex controller via ELCO connector 8016, 56-pos. Solution for Emergency Shut Down (ESD) applications. Suitable for Invensys Triconex 3625 card.

IOA PR-DAI/DAO/F/DS/0.25A/EX

Fuse module for VIP I/O marshalling base elements with replaceable 0.25 A fuse in the field device supply path. Integrated test points and a disconnect knife allow uninterrupted signal measurement.

FUSE/TE5/315MA/T-10PCS

Fuse set, number: 10 Pcs., nominal current: 0.315 A, tripping characteristic: slow-blow (T)

TC-2KS40-AO8-EX-PR-RS

Termination Carrier for redundantly connecting 8 MACX Analog Ex i output signal conditioners to analog output cards of the Yokogawa ProSafe-RS controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa SAI533 card.

TC-C-MAX2-SC-32221112

Cable set for signal transmission and power supply on the Termination Carrier for signal conditioners from the MACX Analog Ex series. Connection of terminal points 3.2 and 2.2 (signal transmission for active input cards) as well as 1.1 and 1.2 (power supply) to the signal PCB.

VIP/P/FKC/KIT CX

Plug kit for use with VIP/MSTB/D50M/BASE..., push-in connections

CAB-MSTB32/2XMC9/18/ 4,0M/C3/S

TC-C-PTB3-SC-SET1

Cable set for TC-MACX-MCR-PTB power and fault signaling module (Item No. 2904673), for use on the Termination Carrier for signal conditioners from the MACX Analog Ex series.

IOA DAC-4DI/AI/EX

Digital-to-analog converter for VIP I/O-Marshalling base elements. For connection of four digital inputs and conversion to a single analog 4...20 mA signal. Saves three I/O channels.

VIP/S/D25M/BASE 1-8/L/C/EX

8-channel VIP I/O marshalling base element for universal use. All connections as screw connection technology. This module with the D-SUB 25 connector is pin compatible with the Foxboro I/A series DCS.

IOA MCR-CJC-PT100

Plug for cold junction compensation for thermocouples, in combination with MACX MCR(-EX)-TC... temperature transducers

TC-MACX-MCR-PTB

Power and fault signaling module with screw connection, only for use on the Termination Carrier, excluding corresponding DIN rail bus connector