Surge protection

F-MS 12 P

Type 2 surge protection plug with N-PE total current spark gaps for VAL-MS-PT base element.

F-MS 12 ST

Surge protection plug type 2, with N-PE total current spark gap for base element.

F-MS-100-264-P

Surge protection plug type 2, with N-PE total current spark gap for base element.

F-MS-50-275-P

Surge protection plug type 2, with N-PE total current spark gap for base element.

F-MS-T1/T2 50

Lightning/surge arrester, consisting of base element and protective plug with N-PE total current spark gap, for mounting on NS 35/7,5. Housing width: 17.5 mm (1TE)

FLT-ISG-100-EX

Isolating spark gap for the hazardous area with plastic sleeve and M10 connection thread screws. For indirect connection/grounding of operationally isolated system parts in the event of lightning.

FLT-ISG-BR-11

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 11 mm.

FLT-ISG-BR-18

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 18 mm.

FLT-ISG-BR-22

Bracket for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 22 mm.

FLT-ISG-CA-300

Connecting cable for FLT-ISG-100-EX, length 300 mm.

FLT-ISG-PL-18

Plate for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 18 mm.

FLT-ISG-PL-26

Plate for fixing the FLT-ISG-100-EX isolating spark gap to a flange, drill hole diameter of 26 mm.

FLT-MB-T1-264/12.5-3+0-UT-R

Compact, non-pluggable lightning current/surge arrester free of leakage current based on wear-free carbon spark gap technology for 3-phase power supply networks with common N and PE (4-conductor system: L1, L2, L3, PEN), suitable for use in the unmetered area, discharge capacity of up to 50 kA for lightning protection levels III and IV, with remote signaling.

FLT-MB-T1-264/12.5-3+1-UT-R

Compact, non-pluggable lightning current/surge arrester free of leakage current based on wear-free carbon spark gap technology for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), suitable for use in the unmetered area, discharge capacity of up to 50 kA for lightning protection levels III and IV, with remote signaling.

FLT-MB-T1-264/25-1+1-UT

FLT-MB-T1-264/25-1+1-UT-R

FLT-MB-T1-264/25-3+1-UT-R

Compact, non-pluggable lightning current/surge arrester free of leakage current based on wear-free carbon spark gap technology for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), suitable for use in the unmetered area, discharge capacity of up to 100 kA for lightning protection levels I and II, with remote signaling.

FLT-SEC-H MPB-3+1

Wiring bridge for connecting three FLASHTRAB SEC HYBRID lightning arresters with an N/PE spark gap to a 3+1 circuit for TN-S-/TT systems. Connecting pitch of 17.5 mm, 1-phase, 8-pos., 35 mm² cross section with stable plastic housing for the required touch proofness when used as neutral conductor bridge.